top of page
Blog: Blog2

Kinked Mini-Split Line Set Repaired Near Luck, WI

Writer: Justin Leach
Justin Leach
Oct 10
1 min read

We repaired a mini-split near Luck, WI that another contractor had installed. The line set had a kink in it, and a pinched line like that restricts refrigerant flow and makes the whole system work harder than it should.

We recovered the refrigerant and cut out the kinked section, which is the piece in the left photo. Then we spliced in new copper with an RLS press fitting (right photo) and redid one of the flares.

Before recharging, we pressure-tested the system with nitrogen and pulled a vacuum to make sure it was tight and dry. Then we recharged it and put it back in service.

Mini-split repair in the Luck, WI area. Heidikin Heating, Electric, Plumbing & Well. Call (715) 716-0700, or visit goheidikin.com.

Kinked mini-split line set section removed (left) and new copper spliced in with an RLS press fitting (right) near Luck, WI
Ā 
Ā 
Ā 

Comments


Contact Us!

Call or Text: (715) 716-0700

Thanks for submitting!

Blog: Contact

Justin Leach

Justin Leach

Justin Leach
Handyman Botched Water Heater Repair šŸ”„šŸ’§

Handyman Botched Water Heater Repair šŸ”„šŸ’§

02:34
⚔ Electrifying a Greenhouse: 2" PVC Conduit for a 100 Amp Subpanel

⚔ Electrifying a Greenhouse: 2" PVC Conduit for a 100 Amp Subpanel

02:23
After-Hours Water Main Leak Repair šŸŽˆ (She Used a BALLOON!) #shorts

After-Hours Water Main Leak Repair šŸŽˆ (She Used a BALLOON!) #shorts

01:16
bottom of page